High Quality Fluid pressure sensor which work in Oil or Fuels Technical Specification Process Connection 1/8 Inch NPT Male Safe Over Range 150% of Range Burst Pressure >300% of Range Accuracy 0.5%FS Thermal Effects Zero +0.04% FS/C Output 0.5v to 4.5v Supply 5V Operating...
High Quality Fluid pressure sensor which work in Oil or Fuels Technical Specification Process Connection 1/8 Inch NPT Male Safe Over Range 150% of Range Burst Pressure >300% of Range Accuracy 0.5%FS Thermal Effects Zero +0.04% FS/C Output 0.5v to 4.5v Supply 5V Operating...
4 Bar Map Sensor Comes supplied with either a -3 AN Male Thread or 6mm Hose Barb. 1ms Response time
Technical Specification Process Connection 4.7mm Barb Safe Over Range 150% of Range Burst Pressure >300% of Range Accuracy 0.5%FS Thermal Effects Zero +0.04% FS/C Output 0.5v to 4.5v Supply 5V Operating Temp Range Construction Stainless Steel Electrical Connection 50cm – 26AWG Screened Cable...
The GM Open Element fast response air temp sensor provide great response and accuracy. Operating range of -40c to +135c Technical Specification Process Connection 3/8 NPTF Fitting Response Time <10Sec Accuracy +1c Thermal Effects Zero +0.04% FS/C Supply 5V Construction Brass Electrical Connection 26AWG Screened...
Capable of reading alcohol contents of fuel from 0-100% range. Ideal to work with our flex fuel strategy on all out management systems Comes with -6 Fittings and Connector Kit Supply – 12v Output – 0-5v PWM
Fluid Temp Sensor –The Syvecs fluid temperature sensor are designed to withstand the most demanding of environments. Supplied with a 1/8” NPT thread Typical application include: Oil – Fuel – Brake Fluid – Coolant – Water Range -30°C to +150°C Technical Specification Process Connection 1/8 Inch...
Lab Grade inconel high temperature/fast responding k-type thermocoupler.. suitable for -100 to +1100C operation. This has a 100mm long, 3mm diameter probe tip which can be bent (minimum radius of 20mm) to ease installation. It has a metal-braided PTFE cable that’s 2m long, terminated with...
Our full range knock sensor has a working frequency of 1hz -20hz, Installation is done via a M8 Bolt onto the Engines block and need to be tightened to 20nm. Comes complete with mating connector and pins
