THE DATALOGGER for EMU CLASSIC and EMU BLACK is capable of recording all log channels (the same as on PC) with 25Hz on SDHC card (4GB or bigger required) Points to note with our logger, is that it is capable of recording 11 hours data per 1GB....
Connection cable for Ecumaster Data Logger -1 (EDL-1). Length: 1.5m (shielded) Set has EDL-1 plug
The DBW module is required to allow EMU to control the electronic throttle and it is connected to the an AUX or an INJ output. up to 7A H-Bridge output current, only one EMU output required to control electronic throttle
Digital ECU Tuner 3 is the most popular device as a “piggy back” unit on the market. Due to its many features and cost friendly price, this product has gained a large group of satisfied customers and becoming one of the most purchased piggy back units...
Pigtail wiring loom for the Ecumaster DET3
The digital gear indicator is designed to work with an aftermarket ECU using a CAN stream device to show the driver the current gear and (optional) shift light – these two pieces of information are the most important for racing drives. Another feature of our...
The device contains two independent H-Bridges, with over-current and short circuit protection, capable of 10A continuous current and 30A peak current. H-Bridges can be controlled via device inputs or CAN bus messages. Voltage range: 6V – 28V (12V and 24V automotive installations) Output current: 10A...
Thermocouple to CAN Module Measuring exhaust gas temperature for each cylinder is a very cost effective way to monitor and check air distribution in your intake manifold. This small module is converting signal from up to 8 K-type thermocouple probes to can bus message this...
ENCLOSURE EMU BLACK bespoke enclosure is made from CNC machined aluminium. The enclosure design guarantee high immunity to mechanical damage, water resist (IP65) and very good heat conduction from electronic components. Additional hole through the enclosure provides mounting point. At the front of the enclosure...
